$75.46 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Ontario, California, United States
Ships to: US,
Item: 264542334561

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:K620041
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:Does not apply
Manufacturer Part Number:TA81008602P
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm, Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Suspension Grade:Standard
Quantity:2 Pcs
Cross Reference Part Number:2004 2005 2006 2007 2008 2009
Fitment:For Mazda 3
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On

eBay 1.Fit For 2007-2009 Mazda 3 (Excluding Speed Model) 2004-2006 Mazda 3 2006-2014 Mazda 5 2.Package Includes: Lower Ball Joints come Pre-Assembled onto the Lower Control Arms 1x Part# Front Left Lower Control Arm w/ Ball Joint and Bushing – K620040 1x Part# Front Right Lower Control Arm w/ Ball Joint and Bushing – K620041 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-09 Mazda 3 1.Fit For 2007-2009 Mazda 3 (Excluding Speed Model) 2004-2006 Mazda 3 2006-2014 Mazda 5 2.Package Includes: Lower Ball Joints come Pre-Assembled onto the Lower Control Arms 1x Part# Front Left Lower Control Arm w/ Ball Joint and Bushing – K620040 1x Part# Front Right Lower Control Arm w/ Ball Joint and Bushing – K620041 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Suspension Control Arm The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: (1).Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. (2).Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. (3).Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. (4).Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. Suspension Control Arm Replacement Guideline: Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Picture(A) A defective control arm can manifest in the following ways: (1).Noise (squeaking, creaking, rumbling). (2).Deteriorating driveability. (3).Increasingly woolly and imprecise steering. (4).Uneven tyre wear. Tip:If the control arm is in working order, it is possible to only replace the defective bearings and joints. However, replacing bearings, control arm bushings and ball joints can be very complex and costly. Picture(B) 1.First lift the vehicle using a car lift, ideally a wheel-free four-post car lift. This makes it easier to correctly tighten the control arm fixing screws. WARNING:Depending on the axle design, the control arm may need to be secured against falling with a suitable device, e.g. a transmission lifter. 2.Treat the fixing screws and nuts of the control arm with rust solvent and leave it to work for a few minutes so that they are easier to loosen. 3.On vehicles with automatic headlight levelling, it may be necessary to detach the leveling sensor from the control arm. Picture(C) 4.If the stabilizer is connected to the control arm, the next step is to loosen and remove the corresponding stabiliser fixing screws. 5.Loosen and remove the control arm fixing screws. 6.Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). 7.Remove the old control arm. Picture(D) 8.Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner. Otherwise single rust particles can enter the new control arm joint via the ball pin, potentially leading to premature failure of the joint. Picture(E) 9.Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Picture(F) 10.Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. NOTE:Do not tighten the fixing screws and nuts in this step, otherwise the rubber mounts will twist when the suspension compresses. This would lead to undesired preloading on the mounts. Picture(G) 11.Now lower the vehicle until the suspension is compressed. Depending on vehicle type, load or unload the vehicle until the required height published in the specific installation instruction is reached. This is where a wheel-free four-post car lift is advantageous, as the underside of the vehicle can still be easily accessed once lowered. 12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. 13.Lower the vehicle all the way. 14.Measure the chassis and adjust if necessary. 15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. 16.To conclude, test-drive the vehicle. Frequently Asked Questions (1).What’s the function of control arm? The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward. (2).What is the significance of the control arm for the car? As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members. (3).How to tell the quality of control arm? Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance. Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc. (4).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (5).What is the average cost of replacing control arms? The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K620041 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA81008602P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm, Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Suspension Grade : Standard Quantity : 2 Pcs Cross Reference Part Number : 2004 2005 2006 2007 2008 2009 Fitment : For Mazda 3 Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 17.69 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 19.49 2x Rear Trunk Hatch Liftgate Lift Supports Springs Struts For Scion tC 2005-2010 USD 15.86 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 24.98 Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L USD 46.99 Newly Listed Running Boards Fits 19-24 Chevy Silverado GMC Sierra 1500 Side Steps Nerf Bars USD 154.77 Running Boards Fits 2019-2024 Dodge Ram 1500 Quad Cab Side Steps Steel Nerf Bars USD 154.77 Running Boards Fits 2009-2018 Dodge Ram 1500 Quad Cab Side Steps Nerf Bars BLK USD 154.77 Running Boards Fits 2009-2018 Dodge Ram 1500 Quad Cab Side Steps Steel Nerf Bars USD 154.77 Running Boards Fits 2019-2024 Dodge Ram 1500 Quad Cab Side Steps Nerf Bars BLK USD 154.77 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-09 Mazda 3 1.Fit For 2007-2009 Mazda 3 (Excluding Speed Model) 2004-2006 Mazda 3 2006-2014 Mazda 5 2.Package Includes: Lower Ball Joints come Pre-Assembled onto the Lower Control Arms 1x Part# Front Left Lower Control Arm w/ Ball Joint and Bushing – K620040 1x Part# Front Right Lower Control Arm w/ Ball Joint and Bushing – K620041 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Suspension Control Arm The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: (1).Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. (2).Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. (3).Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. (4).Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. Suspension Control Arm Replacement Guideline: Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Picture(A) A defective control arm can manifest in the following ways: (1).Noise (squeaking, creaking, rumbling). (2).Deteriorating driveability. (3).Increasingly woolly and imprecise steering. (4).Uneven tyre wear. Tip:If the control arm is in working order, it is possible to only replace the defective bearings and joints. However, replacing bearings, control arm bushings and ball joints can be very complex and costly. Picture(B) 1.First lift the vehicle using a car lift, ideally a wheel-free four-post car lift. This makes it easier to correctly tighten the control arm fixing screws. WARNING:Depending on the axle design, the control arm may need to be secured against falling with a suitable device, e.g. a transmission lifter. 2.Treat the fixing screws and nuts of the control arm with rust solvent and leave it to work for a few minutes so that they are easier to loosen. 3.On vehicles with automatic headlight levelling, it may be necessary to detach the leveling sensor from the control arm. Picture(C) 4.If the stabilizer is connected to the control arm, the next step is to loosen and remove the corresponding stabiliser fixing screws. 5.Loosen and remove the control arm fixing screws. 6.Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). 7.Remove the old control arm. Picture(D) 8.Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner. Otherwise single rust particles can enter the new control arm joint via the ball pin, potentially leading to premature failure of the joint. Picture(E) 9.Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Picture(F) 10.Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. NOTE:Do not tighten the fixing screws and nuts in this step, otherwise the rubber mounts will twist when the suspension compresses. This would lead to undesired preloading on the mounts. Picture(G) 11.Now lower the vehicle until the suspension is compressed. Depending on vehicle type, load or unload the vehicle until the required height published in the specific installation instruction is reached. This is where a wheel-free four-post car lift is advantageous, as the underside of the vehicle can still be easily accessed once lowered. 12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. 13.Lower the vehicle all the way. 14.Measure the chassis and adjust if necessary. 15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. 16.To conclude, test-drive the vehicle. Frequently Asked Questions (1).What’s the function of control arm? The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward. (2).What is the significance of the control arm for the car? As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members. (3).How to tell the quality of control arm? Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance. Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc. (4).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (5).What is the average cost of replacing control arms? The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K620041 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA81008602P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm, Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Suspension Grade : Standard Quantity : 2 Pcs Cross Reference Part Number : 2004 2005 2006 2007 2008 2009 Fitment : For Mazda 3 Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.

Frequently Asked Questions About 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-06 Mazda 3 in My Website

lrssolutions34.com is the best online shopping platform where you can buy 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-06 Mazda 3 from renowned brand(s). lrssolutions34.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-06 Mazda 3 on lrssolutions34.com?

lrssolutions34.com helps you to shop online and delivers Hermes to your doorstep. The best-selling Hermes on lrssolutions34.com are: HERMES Scarf Cotton Scarf Used BS99 HERMES Twilly Scarf Sea and Surf and Fan Ribbon Tie Scarf Accessory Logo Silk HERMES Used Scarf Twilly Silk Bordeaux Engji Alphabet Logo Women’s Authentic HERMES LE JARDIN DES PEINTRES Carre Double Face 903908S Scarf #260… HERMES Kelly Messenger PM Evercolor Gold W bg15784 HERMES PicotinGM Shoulder Bag Brown Amazonia Women NIB 100%AUTH HERMES Gypsiere 28 Rose Sakura Swift Leather Palladium Hardware HERMES Valparaiso PM Black Handbag Tote B Rank Toile Chevron Calf Hermes Tote Bag White Bus Gm Brown Leather Fjord E Engraved Freestanding A4Handb HERMES Suck Clutch Good Rock pouch bag with strap Clutch bag HERMES Garden Party 36 PM □F◻︎ handbag tote bag Toile H leather brown beige #215 Handle Shoulder Straps For Hermes Evelyn TPM/PM/GM/TGM Auth Hermes Air Line Pochette Shoulder Bag Brown Canvas Lightweight Compact Smal HERMES Scarf Carre 90 Scarf Rocaille Seashell Silk Purple AA Women’s HERMES vintage Shoulder Bag canvas Women HERMES Carre 40 Petit Carre Ranch Pattern Scarf Silk Red Orange Women’s HERMES Rosange Scarf Diamond Scarf Accessories Silk Logo Orange HERMES Herbag Zip PM A◻︎ Cactus Twill leather #1011 HERMES Shoulder Strap Fjord G Fittings for Kelly Bandouliere Red Length 83cm Exc Hermes Air Line Pochette Shoulder Bag Grey Canvas HERMES Women’s M… GZl14p8a HERMES Caravan Horizontal MM Tote Bag 2WAY Shoulder Crossbody Black Leather Authentic HERMES Set of Padlock & Key Cadena Silver Charm Number random Hermès Twilly Brides et Gris Gris Mare and Charms Twilly Silk HERMES Herbag Zip MM Pegasus pop 2WAY Hand Bag Shoulder Bag Hermes Silk Scarf Carre 90 “Les Legendes de L’arbre” White Silk Scarf HERMES Women 2WAY bag Kelly 28 outside sewing Rouge ash/Palladium Metal HERMES Bag Evelyn GM Evelyn Evelyn 1 shoulder bag Panama straw calf HERMES Medor 23 Chocolate Brown Box Leather Palladium Collier De Chien Clutch L HERMES Logo Rosange Scarf Accessories Fashion Accessories Scarf Blue Women’s HERMES Rare Scarf Carre 45 EARLY AMERICA Good Old America Silk Unis AUTHENTIC HERMES Bolide31Hand Bag Rose shocking Coromandel HERMES Picotin Lock MM felt/Vaux Swift Gris Pale/Gold Women Handbag Hermès Twilly PANTIN CITY Pantin City Twilly Silk HERMES Handbag Grey Ladies Hermes Marwari Gm Taurillon M-Engraved Shoulder Bag Brown Vint Hermes Black Toile Offcier Herbag Ado PM 2 in 1 Backpack Handbag USED HERMES Saxo PM Handbag One Handle Toile Ash Canvas Leather Beige Brown HERMES Evelyne3PM Shoulder Bag Rose Tyrian Pink / SilverHardware Epsom Women HERMES Twilly Objets de Curiosite Silk Scarf Used Women’s HERMES Twilly 1001H Silk Scarf Used Women’s Hermes Black Box Calf Onimaitou Shoulder Bag Pochette □F XX91128 Hermes Handbag HERMES Handbag Tote MM New Fourre-Tout Canvas Black /351315 HERMES Bolide 45 Baseball Navy Silver Hardware C Engraved Women’s Handbag HERMES Fool Toe Cavalier Canvas Orange HERMES Garden party PM Rose azalee hand bag 800000131181000 HERMES Bored 1923 25 Veau Epsom Jonapnapur Women Handbag Bag HERMES Kaback GM Tote Large Handbag 2Way Shoulder Toile Leather Poppy Red HERMES Garden Party 36 Year No stamp bg10713 HERMES Cabag 2 Way Shoulder Bag Handbag Toilet H Canvas Etoupe HERMES Il de Veau 〇Y stamp 1995 #421 HERMES Sangle 25 blue brown woven leather gold hardware bag strap HERMES Picotin Handbag Clemence leather Purple Leysin Used Women E SHW Hermes Victoria 35 Tote Shoulder Bag Taurillon Clemence Leather Orange K HERMES Couchevel Jaune Mini Drawstring Vespa Pouch Leather YellowFrom Japan Rare Hermès Nami 2000 Green Hermes Stamp: D Hermès Elan Pocket 24 Swift Gold Gold Metal Fittings B: 2023 HERMES backpack leather RED HERMES Double Sens 36 Clemence Reversible Tote Mint Blue Thalassa Engraved P HERMES Handbag Bolide 1923 Coromandel Orange □J◻︎ #016 HERMES Onymetou Shoulderhosier Pochette #3731 Le Monde d’ Hermes 2023 Book + shopping bag tote new authentic Pop Up Shop HERMES halzan 31 A◻︎ Red Casaque ･ #606 Hermes Double Sense 45 Hermes Dalvy Mm Box Calf Leather Gd Metal Fittings A Stamp 1997 Handbag Top Hand HERMES Garden Party Size PM Negonda Leather Biscuit HERMES Vespa Couchevel Blue Jean □J engraved shoulder bag Blue F17 Hermes Marwari Pm Taurillon O Engraved Shoulder Bag Black HERMES Evelyne TPM Suede Turquoise Blue Shoulder Bag Engraved I HERMES Her Line Tote Size MM Canvas Gray HERMES Bag Double Sense 45 Double Sense Tote Bag Reversible Taurillon Hermes Vespa Couchvel gold I stamp silver hardware shoulder bag Crossbody bag HERMES Drag 30 Handbag Brown Box carf Women Hermes Silk Scarf Carre 90 “JUMPING” Blue Silk Scarf HERMES Tote Bag Acapulco MM Nylon Leather Brown Hermes Bride-A-Brac Case GM Canvas Hibiscus Pink Pouch Large Model Authentic HERMES ZIPENGO Chaine d’Ancre PM 084321CK pouch #260-006-858-3279 HERMES Steve 35 Shoulder Bag Trillon Clémence Etoope Engraved L Hermes Marwari Gm Taurillon Clemence Etoupe N Carved Around 2010 Shoulde HERMES Bolide 1923 25 Y◻︎ Rose Confetti Epsom #163 HERMES Shoulder Bag Varda 35 SilverHardware Calf HERMES Carre 90 Silk Scarf SPLENDEUR DES MAHARAJAS White Vintage Unused with Box HERMES Picotin Lock GM Hand bag HERMES Bolide 31 2WAY Taurillon Clemence Crevetto Women Handbag Bag HERMES Onimetu Calf Leather Genuine Mini Shoulder Sacoche Crossbody Brown Bag Hermes La Tote Shoulder Semi-Shoulder Box Calf Leather Rouge Red Gold Hardwa HERMES Shoulder Bag Sac A Depeche 21 SilverHardware Taurillon Clemence Hermes Silk Scarf Carre 90 “JUMPING” Green Silk Scarf Hermes Petite Sentul PM tote bag brown A4 size Canvas N13 HERMES GHW Picotin MM Handbag Maurice Leather Vert Olive/Olive Green HERMES Drug 27 Handbag Chocolat Brown/GoldHardware Box carf Women Hermes Shoulder Bag Jypsiere Mini Verso Pink 483511 HERMES Double H Shoulder Bag vintage Black / Gold Hardware Calfskin Women Hermes Evelyn I Shoulder Etoupe Togo Greige 12.2×11.2×2.3 inch HERMES Vinyl Kelly Beach Hand Bag Clear SOUVENIR DE L’EXPOSITION Hermes Silk Scarf Carre 90 “NAPOLEON” Brown Silk Scarf HERMES Darvi MM Handbag black/Gold Hardware Box carf Women HERMES vintage Shoulder Bag black Box calfskin Women HERMES Twilly Camaille Scarf Blue Green Multicolor Silk Women’s Used HERMES Carre 90 COUP de FOUET Scarf Horse Pattern Silk Orange Red Red BM OH Mens Pullover Fleece Hoodie